Solid State Logic SSL2+ Audio Interface: Дisclosure: If you purchase an item or service from an outbound link, we may receive a referral fee from a qualifying purchase.

Equipped with a USB output, the AT2020USB+ is designed for digitally capturing music or any acoustic audio source. It also has a mix control which will blend the mic signal and the playback audio making it so easy to Monitor.

Audio Technica AT2020 Condenser Microphone: Based on the renowned AT2020 Built into the microphone is a Headphone jack and volume control, so itвЂ™s always easy to monitor your mic signal without any latency issues.

For this reason, we recommend that you use a shock mount with this microphone to make sure that your audio recording is as clean as possible and that the bumps and taps donвЂ™t distract your audience. The AT2020 Microphone has a tendency to transmit any bumps, taps, or shakes that it experiences. If you get too far away from the microphone, you will notice that the tone is thin an wispy. If you get too close to the microphone, you will be prone to getting plosives. 4 вЂ“ Microphone DistanceДЄs a general rule, we recommend staying about 4-6 inches away from the microphone when you are speaking into it. We recommend adding a foam windscreen to your microphone because we think itвЂ™s the most consistent and best looking solution. You can use any type of pop filter that you have available to you.

Reduce some sibilance (Makes вЂњsвЂќ sounds easier to listen to, reduce mouth noise).

Prevent Plosives (вЂњPвЂќ and вЂњBвЂќ sounds are problematic with microphones).

We always recommend some type of pop filter when using the Audio Technica AT2020 Mic. If you make either of these mistakes, you will notice that your audio is more roomy sounding and is not high quality.

Speaking into the rear of the microphone booms and mounts compatible with 3/8-16 and 5/8-27 threaded stands designed for use w/ the following Audio-Technica models: AT2020, AT2020 USB.

Speaking into the top of the microphone.

Specifically, you should be talking into the logo that is on the microphone.Д¬ommon mistakes that we see people make with this microphone: This means that it is designed to capture audio from the side of the microphone. In order to use this microphone, you will need an audio interface or an audio mixer that can supply +48v of phantom power to your AT2020 Microphone. This means that XLR to USB Cables or XLR to 1/8вЂі Cables will not work with this microphone because they do not provide the +48v that is required. The AT2020 is not an exception to this rule.

All condenser microphones require +48v of Phantom power in order to activate the microphone. The Audio Technica AT2020 is a condenser microphone. In this article we discuss the 5 most common mistakes that we see people make with the Audio Technica AT2020 Condenser Microphone.

Audio technica at2020 usb shock mount